Free Artwork & Setup on all Orders

Free UK Delivery for orders over £40

SIGN UP TO OUR NEWSLETTER FOR 10% DISCOUNT

Call: 01254 495300

Iron-on Instructions for Heat Seal Badges
  1. Turn on your iron / heat press to a medium setting (approx.150C) and allow it to warm up. Make sure the steam setting is turned OFF.
  2. Cover the badge with a thin piece of material (hankie, pillowcase etc.) and press firmly with the iron or heat press for 15–20 seconds, making sure not to burn the material, badge or garment.
  3. Check all edges and corners are properly fixed and allow the garment to cool down.
  • Feb 28, 2019
  • Category: News
  • Comments: 0
Leave a comment